[Why you are reading it]: First-year environmental science course. This is the assigned reading for week 5, and next Tuesday we have a short-answer quiz on it (definitions plus "explain why" questions).
[The text]: CHAPTER 5 CITIES AS ENVIRONMENTS 117
5.2 Urban heat islands
On a still summer evening, a thermometer in the middle of a large city will often read several degrees warmer than one in the farmland a few kilometres outside it. This difference is called the urban heat island (UHI). It is one of the clearest examples of how humans change local climate without intending to, and it matters because more than half of the world's people now live in urban areas.
5.2.1 Two kinds of heat island
Researchers distinguish between two related measures. The surface urban heat island describes how much hotter the surfaces of a city (roofs, roads, car parks) are than surfaces in the surrounding countryside. It is usually measured from satellites using infrared sensors, and it is strongest in the middle of a sunny day, when dark roofs can be 20 to 40 °C hotter than the air.
The atmospheric urban heat island describes the difference in air temperature, measured by weather stations or by sensors carried on vehicles. Unlike the surface heat island, it is usually weakest around midday and strongest a few hours after sunset, because the city goes on releasing the heat it stored during the day while the countryside cools quickly. For this reason, students should not assume that the hottest surfaces and the hottest air occur at the same time.
118 CITIES AS ENVIRONMENTS
5.2.2 Causes
Several features of cities combine to produce the effect:
Surface materials. Asphalt, concrete and brick have a low albedo, meaning they reflect only a small share of incoming sunlight and absorb the rest. They also have a high heat capacity, so they store large amounts of energy during the day and release it slowly at night.
Less vegetation and water. In the countryside, much of the sun's energy goes into evapotranspiration, the evaporation of water from soil and leaves. This process uses energy that would otherwise heat the air. Cities replace soil and plants with sealed surfaces that shed rainwater into drains, so less energy is used this way and more goes into heating.
Urban geometry. Tall buildings on narrow streets form urban canyons. Sunlight bounces between the walls and is absorbed rather than reflected back to the sky, and at night the walls block heat from radiating away. The proportion of open sky visible from street level, called the sky view factor, is a useful measure: the lower it is, the more heat is trapped.
Waste heat. Vehicles, air conditioners, industry and even people release heat directly. In dense city centres in winter this anthropogenic heat can be a large part of the energy budget.
119 CITIES AS ENVIRONMENTS
Weather also matters. Heat islands are strongest on clear, calm nights. Cloud cover and wind mix the air and reduce the difference between city and countryside.
5.2.3 Consequences
Higher temperatures raise demand for air conditioning, which increases electricity use and, where power comes from fossil fuels, greenhouse gas emissions. The extra waste heat from air conditioners then adds to the heat island, a positive feedback loop.
Health effects are the most serious concern. During heat waves, high night-time temperatures stop the body from recovering from daytime heat. Older people, young children, outdoor workers and people with heart or lung conditions are at greatest risk. Heat also speeds up the chemical reactions that form ground-level ozone, worsening air quality.
Heat is not shared equally within a city. Neighbourhoods with fewer trees and more paved surfaces, often lower-income areas, can be several degrees hotter than leafy districts in the same city. This is why urban heat is increasingly treated as an environmental justice issue.
120 CITIES AS ENVIRONMENTS
5.2.4 Reducing the effect
Most strategies reverse one of the causes above:
Cool roofs and cool pavements use light-coloured or reflective materials that raise albedo, so less sunlight is absorbed.
Urban trees and green spaces provide shade and restore evapotranspiration. Shade is especially effective because it keeps surfaces from heating in the first place.
Green roofs, planted with low-growing vegetation, cool the roof surface and the building below it and slow stormwater runoff.
Planning choices, such as wider streets, open spaces that let wind through, and limits on paved area, affect geometry and airflow over the long term.
None of these is a complete answer. Reflective surfaces can increase glare, and trees need water and space. Cities usually combine several approaches, starting with the hottest and most vulnerable neighbourhoods.
Key point: The urban heat island is not caused by climate change, but the two add together. As heat waves become more frequent, the extra urban warming makes their effects on city residents more severe.
121 CITIES AS ENVIRONMENTS
Figure 5.4 Surface and air temperature across a city transect